|
A GOVT. RECOGNIZED STAR EXPORT HOUSE
An ISO 9001:2015, 14001:2015, 13485:2016, FDA, WHO-GMP, CE & BIS Certified Company |
|
+91-171-2977793, 3501111-1140 (30 Numbers) |
Toll Free No.- 1800-1233-229 |
Water Bath
Serological Water Bath
Model :- RSTI-134 Series
Serological water bath is a versatile equipment to handle any clinical procedure, incubation, inactivation, agglutination and biomedical procedures.
These units are double walled, with the inner chamber being made up of stainless steel and the outer of mild steel which is duly powder coated.
The gap between the walls is fitted with a special grade glass wool in order to avoid thermal losses.
The inner chamber is fitted with an immersion type heating element and is covered with a perforated removable diffuser tray.
The cover is provided with the unit as a standard accessory.
The temperature ranges from ambient to 100°C, and is controlled by a Hydraulic capillary type thermostat with an accuracy of ± 1°C.
It is workable on 220 V AC 50 Hz Single phase.
OPTIONAL (EXTRA COST):
Microprocessor PID digital temp. indicator cum contrroller.
Stirrer with 1/20 Hp motor with S.S. rod blade.
Auto cut off device when water level is low.
TECHNICAL SPECIFICATIONS
Chamber Size (mm) |
Suitable Racks |
Capacity (Ltr.) |
300x175x175 mm |
1 Rack |
12 Ltrs |
300x250x175 mm |
2 Rack |
14 Ltrs |
375x300x175 mm |
4 Rack |
18 Ltrs |
455x300x175 mm |
6 Rack |
25 Ltrs |
605x300x175 mm |
8 Rack |
32 Ltrs |
Water Bath Recangular 'Double walled'
Model :- RSTI-135 Series
It is a double walled unit, with the inner chamber being made up of stainless steel and the outer of mild steel that is duly powder coated.
The gap between the walls is fitted with a special grade glass wool in order to avoid thermal losses.
The concentric rings can be removed in order to accommodate containers of various sizes.
The temperature ranges from ambient to 100°C, and is controlled by a Hydraulic capillary type thermostat with an accuracy of ± 1°C.
It is workable on 220 V AC 50 Hz Single phase.
Inner Chamber Size are
available |
Holes |
Cap. (Aprox.) |
300x250x100 mm |
6 Holes of 75mm |
8L |
355x405x100 mm |
12 Holes of 75mm |
15L |
Optional :-
- Microprocessor PID digital temp. indicator cum contrroller.
- Auto cut off device when water level is low.
Water Bath Precison
Model :- RSTI-137 Series
Precision water baths are designed to thermostatically control and maintain the water temperature between ambient and 100°C. It exhibits exceptional performance and reliability for a wide range of laboratory applications where temperature uniformity and control are particularly critical.
It has a double walled construction, with the inner being made of stainless steel and the outer being made of mild steel which is duly powder coated or S.S
The gap between the walls is fitted with a special grade glass wool in order to avoid thermal losses.
It is provided with toughened glass windows on the two opposite sides, for observations without disturbing the temperature.
It is supplied complete with a stirrer.
It is workable on 220 V AC 50 Hz Single phase.
Optional
1. Microprocessor PID digital temp. indicator cum
contrroller.
2. Auto cut off device when water level is low.
Chamber Size (mm) |
Chamber Size (Inches) |
425x250x225 mm |
17"x 10"x9" |
425x375x375 mm |
18"x15"x15" |
650x450x450 mm |
24"x 18"x 18" |
Water Bath Tissue Flotation
Model :- RSTI-138 Series
The warm tissue floatation bath is the intermediate step between cutting paraffin sections and placing them on slides. A warm water bath allows tissues to relax and smooth out prior to being mounted on a glass slide.
It has a double walled round construction.
The inner chamber is made of stainless steel/black anodized aluminum and the outer is made of mild steel painted in epoxy powder coating.
Temperature is thermostatically controlled, from ambient to 80°C.
The unit comes complete with indicators, wire & a plug.
It is workable on 220 V AC.
Inner Chamber Size are
available |
200mm dia. x 75mm depth. |
250mm dia. x 125mm depth. |
|
Water Bath Incubator Shaker
Model :- RSTI-140 Series
It is used for studies on tissue metabolism, enzymes and protein coagulation and other experiments demanding shaking at constant speed under controlled temperature conditions.
It has a double walled construction, with the inner chamber and the lid being made of stainless steel, and the outer being made of mild steel which is duly powder coated.
The gap between the two chambers is filled with glass wool to prevent loss of heat.
The temperature is controlled from ambient to 100°C, by a capillary type thermostat.
RPM range: 40-140 with a variable electronic speed regulator.
It is workable on 220 V AC 50 Hz Single phase.
Optional (EXTRA COST) :-
- Microprocessor PID digital temp. indicator cum contrroller.
- Digital RPM meter
- Auto cut off device when water level is low.
Chamber Size (mm) |
Capacity (Ltr.) |
275x275x150 mm |
12 Ltrs |
405x300x150 mm |
18 Ltrs |
Constant Temperature Refrigerated Liquid Bath
Model :- RSTI-141 Series
This system is highly sophisticated to provide high cooling/ heating to ensure rapid heat up and cool down times.
It has a double walled construction. The outer body is made up of a thick sheet of mild steel which is duly powder coated and the inner chamber is made up of a sheet of 304 grade stainless steel.
The lid is also double walled, properly insulated and comes with locking facility.
The whole unit is mounted on as sturdy angle iron frame.
The cooling coils are brazed to the outer side of the stainless steel chamber, thus ensuring perfect and uniform cooling.
The insulation is achieved with PUFF (i.e. polyurethane foam), to prevent any heat loss.
For attaining temperatures below the ambient, refrigeration is done through a CFC-free hermetically sealed compressor.
For attaining temperatures above the ambient, heating is done with an immersion type heating element.
It is fitted with a stirrer for temperature uniformity throughout the chamber.
The temperature ranges from -10°C to 90°C and is controlled by a Dual Display Microprocessor PID Digital Temperature Indicator cum controller with an accuracy of + 0.5°C.
It is workable on 220/230 volts AC Supply.
The unit is also fitted with a FHP PUMP for circulating the cooled liquid to an external source such as condenser coils, etc.
Chamber Size (mm) |
Capacity (Ltr.) |
500 X 250 X 150 |
32 .5Ltrs |
Refrigerated Liquid Bath
Model :- RSTI-142 Series
This system is highly sophisticated to provide high cooling/ heating to ensure rapid heat up and cool down times.
It has a double walled construction. The outer body is made up of a thick sheet of mild steel which is duly powder coated and the inner chamber is made up of a sheet of 304 grade stainless steel.
The lid is also double walled, properly insulated and comes with locking facility.
The whole unit is mounted on as sturdy angle iron frame.
The cooling coils are brazed to the outer side of the stainless steel chamber, thus ensuring perfect and uniform cooling.
The insulation is achieved with PUFF (i.e. polyurethane foam), to prevent any heat loss.
For attaining temperatures below the ambient, refrigeration is done through a CFC-free hermetically sealed compressor.
For attaining temperatures above the ambient, heating is done with an immersion type heating element.
It is fitted with a stirrer for temperature uniformity throughout the chamber.
The temperature ranges from -10°C to 90°C and is controlled by a dual display Microprocessor PID Digital Temperature Indicator cum controller with an
accuracy of ± 0.5°C.
It is workable on 220/230 volts AC Supply.
The unit is also fitted with a FHP PUMP for circulating the cooled liquid to an external source such as condenser coils, etc.
Chamber Size (mm) |
Capacity (Ltr.) |
500 X 250 X 150 |
32 .5Ltrs |
Tissue Floatation Bath
Model :- RSTI-3D Series
Tissue Floatation Bath has been developed using microprocessor controls and a modular design that has improved reliability and precision. Corrosion resistant material for durability.
Temperature settings are controlled by feature touch buttons for accurate and precise control and the easy to read LED display show both, set temperature and actual temperature. The probe has a thermostat sensor inside that turns off when it is lifted up and re-starts when
placed back in the basin.
Technical Specifications :
- Temperature Range : ambient to 90° C
- Temperature Tolerance : + 1° C
- Bath Dimensions inner : 300 x 200 x 40mm
INSTRUMENTATION SINCE 1975 © 2024 Radical Scientific Equipments Pvt Ltd, All rights reserved
MICROSCOPES - PROFILE PROJECTORS - OPTICAL INSTRUMENTS - HISTOPATHOLOGY - GLASSWARE - EDUCATIONAL SCIENCE MATERIALS - LABORATORY EQUIPMENT
Radical Scientific Equipments Pvt. Ltd. are Manufacturer and Exporters of Microscope, Biological Microscope, Stereo Microscope, Inverted Tissue Culture, Fluorescent Microscope, Metallurgical Microscope, Polarizing/Ore Microscope, Comparison Microscope, Projection Microscope, Tool Maker Microscope, Pathological Microscope, USB Digital Microscope, Digital Microscope, Measuring Microscope, Microtome / Sharpener / Tissue Processor, Special Purpose Optical Microscope, Industrial Microscope, Profile Projector, Video Measuring Machine, Cameras and Software, Optical Instrument, Physics, Chemistry, Biology, Glassware, Educational Scientific Laboratory Equipments Manufacturers, Science Instruments, Science Equipments, Laboratory Equipments Supplier, Science Instruments Manufacturers & Exporters from India, Autoclave Manufacturers, Incubators and Ovens, Laminar Air Flow, Water Distillation Plants, Laboratory Balances, Water Bath, Centrifuge, Laboratory Shaking Machine, Microtome, Measuring Instruments and other Laboratory Instruments Science Equipments, Electronics Lab Trainers, Physics Lab Equipments, Chemistry Lab Equipments, Chemistry Lab Equipments, Biology Lab Equipments, Geography Teaching Models, Geography Models, Laboratory Microscopes, Glassware, Laboratory Glassware, Plasticware, Lab Plasticware Products, Laboratory Plasticware, Technical Training Kits, Engineering Training Equipment, Engineering Education, Higher Science Instruments, High School Science Lab, Testing Machines, Testing Lab Machines, Analytical Instruments, Platinum Labware, Lab Freezers, Lab Refrigerators, Surveying Instruments, Physics & Science Trainers, Basic Electronics Trainers, Instrumentation Trainers, Electrical Engineering Trainers, Digital Analog Trainers & Kits, IC Tester & Digital IC Tester, High School Experiments Setup, High school physics lab equipment, high school science lab supplies, High School Experiments Supply, Science Education Supply, School Scientific Equipments, Laboratory Instruments & Educational Scientific Equipments, Educational Lab, School Educational Equipments & Lab Supply, Science Educational Kits, Higher Science Educational Instruments, Lab Furniture, Platinum Crucibles, Electronics Trainers, School Products, Educational Scientific Equipments Manufacturers, Science Educational Kits Exporters, School Science Lab Supply, Physics Indian Scientific Dealers, Exporters of Biology Lab Equipments Materials - Specimen Jar, Fossil Slides & Specimens, Skeleton, Dissecting Microscopes, Fiber Glass Models, Micro slides, Dissecting Set & Spares, Prepared Slides, Microscopes, Human Models, Biological Chart. Biology Labware India, Indian Biology Lab Equipments, Laboratory Biology Suppliers, Biology Lab Equipments, Biology Labware, Biology Laboratory, Biology Instruments Ambala, Biology Instruments Manufacturers, Biology Instruments India, Biology Instruments, Biology Instruments Suppliers, Biology Instruments Exporters, Indian Biology Instruments, Biology Instruments India We are leading Educational Biology Lab Equipments Manufacturers & Educational Biology Laboratory Equipments Exporters, Biology Lab Equipments Exporters, Biology Lab Equipments Manufacturers, Biology Lab Equipments, Biology Laboratory Equipments Suppliers, Chemistry Lab Equipments, Chemistry Instruments India, Chemistry Instruments Exporters, Chemistry Instruments Suppliers, Chemistry Instruments Manufacturers Ambala, Indian Chemistry Instruments, Export are Educational Chemistry Lab Equipments Suppliers to School and Universities