RPP-33 Series
Screen:- Antiglare hard glass screen, graduated & rotatable through 360° having least count 1 minute of an arc. Provided with four clips to hold overlay charts and drawings. Mirrors:- Optically true with surface hard coated to ensure optimum light reflection for best image contrast, long life and edge to edge sharpness on the projection screen. Contour Illumination:- Contour Illumination is provided with a 24V/150W halogen lamp having a built in condenser system. The illumination can be adjusted through a solid state transformer. EPI-Illumination:- A Specially designed LED or 12V/100W halogen light ensures uniform surface illumination system for the above. This provides shadow less light on the optical axis for inspection of cavities etc.
| Screen | Antiglare hard glass screen, graduated & rotatable through 360° having least count 1 minute of an arc. |
|---|---|
| Mirrors | Optically true with surface hard coated to ensure optimum light reflection for best image contrast, long life and edge to edge sharpness on the projection screen. |
| Contour Illumination | Contour Illumination is provided with a 24V/150W halogen lamp having a built in condenser system. |
| EPI-Illumination | A Specially designed LED or 12V/100W halogen light ensures uniform surface illumination system for the above. |
| Electrical | Mains input 220-240 volts AC having built in transformers, On-Off Switch, variable intensity controller for both illumination system, indicator and glass fuse. |
| Accuracy | Projection accuracy ± 0.1% for contour illumination and ± 0.15% for surface illumination. |
| Screen Size | 350mm |
| Lenses | 10x Objective (Standard) |
| Model No. | RPP-33 | RPP-33DM | RPP-33DR | RPP-33DP |
|---|---|---|---|---|
| Projection Screen | 350mm | |||
| Illumination | Contour illumination 24V/150W Halogen Lamp & Surface Illumination 12V/100W Halogen Lamp. | |||
| X-Y Range | 50x50mm* (with the use of gauge blocks) |
200x100mm |
||
| Z-axis | Manual | |||
| Effective Table Area | 125x125mm | 275x180mm | ||
| Measuring Unit | Micrometer Heads 0-25mm | Digital Micrometer Heads 0-25mm | Built in Linear Scales | |
| Resolution | 0.01mm | 0.001mm | 0.001mm/ 0.00005" | |
| X-Y Counter | No | Yes | ||
| Angle Counter | Optional | Yes | ||
| Rotary Measuring Stage |
Yes | Optional | ||
| Maximum Workpiece height | 116mm | 110mm | ||
| M2D Software | No | Optional | ||
| Dimensions/Weight | 50x84x104cm/150 Kgs. | |||
| Turret | Optional | |||
| Measuring of Geometric Elements | No | Distance, Circle, Angle | Point, line, circle, distance, ellipse, rectangular hole, slotted hole, intersection and intersecting angle and point & angle, plus a number of functions for evaluation | |
Over Lay Chart
|
Swivel Center Support
|
V-Block With Clamp
|
Edge detector
|
Foot switch
|
fixture
|
Holder with clamp
|
D.R.O
|
Data Processor
|